25 junio 2015

¿CUANTA POBLACIÓN DE ABEJAS DEBEMOS TENER? - HOW MUCH WE HAVE BEE POPULATION? (Span and Eng)

La colonia de abejas debe de iniciar la primavera con una buena población.  De esta forma podrá desarrollarse más rápidamente y "llegar al momento de máxima floración con la máxima población" y así obtener una muy buena cosecha de miel. No debemos de olvidar que ésta población a la que nos estamos refiriendo son abejas "pecoreadoras".

¿A que llamamos una buena población?
En este aspecto es fundamental tener presente que cada apicultor deberá tener un conocimiento de las características de la floración de su zona de producción.  Para llegar a las floraciones principales con buenas poblaciones la colonia no deberá tener menos de siete u ocho cuadros de cría cuando le falten unos veinte días para que se inicie la floración.  Esto nos garantizará que en el momento de comenzar el flujo de néctar en el campo, la población de pecoreadoras será abundante. 



¿Qué es la regla de los 40 días en apicultura?
Esta regla implica que lleva 40 días desde la postura del huevo para que una abeja se transforme en pecoreadora y realmente sea de utilidad al apicultor que desea obtener cosecha de miel.  Esto quiere decir que la reina deberá estar aovando 40 días antes del inicio de la floración.  Y al decir aovando, nos estamos refiriendo a que la reina deberá estar en "plena postura" en éste momento.  Teóricamente, para obtener el máximo de cosecha de miel de cualquier floración, la reina deberá alcanzar su máxima postura 40 días antes del inicio de la floración y mantenerse en tal condición hasta 40 días antes de que finalice la floración.  Como se verá más adelante llegado este momento se deberá "cortar" la postura de la reina abruptamente para así lograr que la miel recolectada sea almacenada y no utilizada en la alimentación de cría que será útil para cuando la floración haya finalizado.

Cada vez que el apicultor decida reforzar una colonia deberá previamente saber que con su intervención no solo solucionará el problema de esa colmena, sino que además, no pondrá en riesgo la productividad de la colmena de la cual extrajo abejas o panales. 

Un punto que debemos tener presente es que NUNCA SOBRAN ABEJAS EN UNA COLMENA (si hay muchas nodrizas pasarán antes a pecoreadoras) y SÍ PUEDEN FALTAR ABEJAS.

No debemos olvidar que "siempre es preferible tener una colmena fuerte que sabemos que nos producirá y no dos débiles que difícilmente nos darán cosecha".

Los problemas de población los debemos solucionar con aquel material vivo (abejas y/o cría) de aquellas colmenas que por distintos motivos hemos determinado que no alcanzarán el máximo de población en el momento oportuno.

Algunas causas posibles de poca población.

- En el caso de que la colmena tenga poca población podría ser una reina vieja o mala; de donde todos los esfuerzos que nosotros hagamos reforzando su población serían temporales, ya que luego de un tiempo se volvería a debilitar.  Evidentemente en este caso la solución del problema pasa por cambiar la reina.

- El "bloqueo" de la reina con miel en la cámara de cría no solo trae aparejado una disminución del desarrollo de la población de la colonia, sino que además es el principal motivo de enjambrazón; lo cual también provoca una despoblación muy importante.

- Las fumigaciones en las cercanías del apiario así como los traslados "a piquera abierta" durante el día son causa también de que se produzca no solo  una disminución importante de la población, asi como también un desequilibrio de la colonia de abejas.
¿Cómo reforzar poblaciones?
Los requerimientos van desde el agregado de un panal de cría hasta la fusión de las colmenas.

Refuerzo de colonias con panales.

¿Qué tipo de panales utilizamos?
Cuando reforzamos con panales a una colonia los mismos deberán ser preferentemente con cría naciente y sin abejas.  Para esto buscaremos un panal con cría operculada y donde observemos a las abejas naciendo.  Si nosotros agregamos un panal con cría abierta (larvas o huevos) estamos originándole un trabajo extra a la colonia; ya que deberán alimentar y dar calor a esa cría por varios días y no estaremos logrando nuestro objetivo primario que era proporcionarle a esa colonia abejas jóvenes y vigorosas a la brevedad posible.

En caso de que agreguemos un panal con abejas adheridas, debemos verificar que no esté la reina en el mismo.  Como veremos más adelante el reforzar con abejas solo es recomendable cuando existe una buena entrada de néctar.


¿Cuántos panales agregamos?
Otro aspecto muy importante es el hecho de que "nunca debemos agregar más panales de los que la población de la colonia pueda cubrir".  No se aconseja agregar más de uno o dos panales de cría por vez.  Una vez que las abejas del panal que agregamos hayan nacido, se podrá repetir la operación.
Esta tarea de agregar panales con cría naciente es muy recomendable y utilizado a la hora de "apurar" a los núcleos en donde las reinas ya han iniciado su postura.

¿Dónde colocar los panales con cría?
A diferencia de cuando introducíamos cuadros con láminas de cera estampada, en el caso de agregar cuadros con cría, éstos se deberán colocar en el centro del nido de cría. De esta forma estaremos garantizándole a esa cría el calor necesario, y al panal, un pronto acondicionamiento para que la reina lo llene de postura.

Refuerzo de colonias con abejas.

¿En qué caso podremos realizarlo?
Como mencionamos anteriormente podemos reforzar con abejas solo en condiciones de existir buen flujo de néctar.  En este caso las abejas estarán menos propensas a pelearse entre sí y evitaremos la mortandad de las mismas.

¿De dónde se sacan las abejas?
Generalmente se sacarán abejas de aquellas colmenas que no repuntarán en la temporada y hemos decidido que no vamos a solucionar.  Estas abejas no son productivas en su colmena y cumplirán un papel muy importante a la hora de reforzar colonias. 
Otra fuente de abejas son aquellas colonias que tienen poblaciones muy fuertes y a las que no les afecta la extracción de uno o dos panales de abejas.

¿Con que tipo de abejas reforzamos?
Si vamos a reforzar con abejas lo más recomendable es hacerlo siempre con nodrizas.  De esta forma le damos la posibilidad a la colonia de que ella misma establezca su equilibrio natural, ya que, de sobrar nodrizas, éstas pasarán antes a pecoreadoras.  Las abejas nodrizas se comportan mejor como pecoreadoras que si obligamos a pecoreadoras a realizar tareas de nodrizas.  Además, todavía las nodrizas no han salido nunca de la colmena y no tienen fijada la ubicación de la misma dentro del apiario, por lo cual no retornarán a su colmena original.  Estas abejas además están menos propensas a ser atacadas por las abejas de la colmena reforzada.


¿De dónde se sacan las abejas nodrizas?
Las mismas estarán ubicadas fundamentalmente en los panales con cría abierta (larvas y huevos) de la colmena, ya que su principal función en esta etapa es la de alimentar a las larvas.

¿Cómo se incorporarán éstas nodrizas a la nueva colmena?
Se deberán retirar uno o dos cuadros de la cámara de cría de la colmena a reforzar.  En el espacio dejado por éstos se introducirá parcialmente el cuadro cubierto con las abejas nodrizas que utilizaremos para reforzar, donde se sacudirán enérgicamente las abejas que allí se encuentren.  !! OJO ¡¡ previo a sacudir las abejas debemos de revisar muy bien el panal y verificar que en el mismo no se encuentre la reina.  Hay apicultores que sacuden éstas abejas en la piquera de la colmena.  De esta forma las abejas pecoreadoras volarán y las que son nodrizas se dirigirán lentamente hacia el interior de la colmena.

En algunos casos puede ser aconsejable reforzar colonias con pecoreadoras, pero en estos casos debemos tener muy presente que le quitaremos este tipo de abejas a una colmena solo con flujo de néctar presente.  Hay apicultores que intercambian colmenas de lugar con núcleos u otras colmenas débiles como forma de aumentar o reforzar la población de una colmena.  Esta operación puede brindar buenos resultados al finalizar el flujo principal y previo a la invernada como forma de emparejar cría y poblaciones de colmenas que han llegado a esta época con desarrollos exagerados.

HOW MUCH WE HAVE PEOPLE?

The bee colony should start spring with a good population. In this way you can develop faster and "reach peak bloom time with the maximum population" and get a good crop of honey. We must not forget that this population to which we are referring are bees' foraging ".

What we call good people?
In this regard it is essential to keep in mind that every beekeeper should have a knowledge of the characteristics of the blooming production area. To reach the main blooms with good populations colony must not be less than seven or eight brood when at least twenty days to start flowering. This will ensure that in the time to start the flow of nectar in the field, the population of foragers will be abundant.

What is the rule of the 40 days in beekeeping?
This rule implies that it has been 40 days since the position of the egg to turn into a bee pecoreadora and genuinely useful to beekeeper For honey harvest. This means that the queen should be aovando 40 days before the beginning of flowering. And to say aovando, we are referring to the queen must be in "full position" at this time. Theoretically, for maximum honey harvest any bloom, the queen should reach its maximum position 40 days before the beginning of flowering and stay in that condition until 40 days before the end of flowering. As you will be seen later come this time will be "cut" the position of the queen abruptly in order to achieve that honey collected is stored and not used in food breeding that will be useful when flowering has finished.

Each time the beekeeper decided to reinforce a colony should know that the intervention not only solve the problem of the hive, but also not jeopardize the productivity of the hive which bees or honeycombs extracted previously.

A point to keep in mind is that never too many bees in a hive (if there are many nurses to pass before foragers) may be missing if BEES.

We must not forget that "it is always preferable to have a strong hive we know that we produce and not two weak that we hardly will harvest."

The population problems must be solved with this living material (bees and / or brood) of those who for various reasons hives have determined that will not reach the maximum population in a timely manner.

Some possible causes of poor population.

- In the event that the hive has a small population may be an old or poor queen; where all the efforts we make to strengthen its population would be temporary, because after a while it would weaken. Obviously in this case the solution is to change the queen.

- The "blockade" of the queen with honey in the brood chamber not only brings about a decrease in the development of the population of the colony, but also is the main reason swarming; which also causes a very significant depopulation.

- The spraying near the apiary and transfers "to open runner" during the day are also due to occur not only a major population decline, as well as an imbalance of the bee colony.
How to strengthen populations?
The requirements range from the addition of a brood comb until the merger of the hives.

Strengthening colonies with hives.

What kind of diapers use?
When reinforced with a colony combs they should preferably be the same with emerging brood without bees. For this we look for a honeycomb with capped brood and observe where the bees born. If we add a honeycomb with open brood (larvae or eggs) are originándole extra work to the colony; because they must feed and heat the breeding for several days and we are not achieving our primary objective it was to provide a bee colony that young and vigorous as soon as possible.

If we add a honeycomb with bees stuck, we must make sure it is not the queen in it. As discussed later reinforced by the bees it is only recommended when there is a good entry of nectar.

How many panels add?
Another important aspect is the fact that "we should never add more panels of the population of the colony can cover." It is not advisable to add more than one or two brood combs at a time. Once bees honeycomb we added were born, you can repeat the operation.
This task of adding panels with nascent breeding is highly recommended and used when "rush" to the cores where the queens have already started their stance.

Where to place the combs with brood?
Unlike when we introduced tables with sheets of beeswax, in the case of add pictures with young, they should be placed in the center of the brood nest. In this way we are guaranteeing to that breeding the necessary heat, and the honeycomb, an early preparation for the queen to fill the position.

Strengthening bee colonies.

What if we can do it?
As mentioned earlier we can reinforce with bees only able to be good nectar flow. In this case the bees are less likely to fight each other and avoid the slaughter of them.

Where bees are removed?
Bee hives those who do not will rebound in the season and we have decided that we will not solve are generally drawn. These bees are not productive in their hive and will play a very important role in strengthening colonies.
Another source of bee colonies are those that have strong populations and those not affected by the removal of one or two beehives.

What kind of bees strengthened?
If we are to strengthen with bees it is best to do it always with nurses. In this way we give the possibility to the colony that it establishes its natural balance, because, nurses left over, they will pass before a foraging. Nurse bees and foragers behave better if we force foragers nurses to perform tasks. In addition, the nurses still have never left the hive and have no fixed location within the same apiary, so they do not return to their original hive. These bees are also less likely to be attacked by bees from the hive reinforced.

Where nurse bees are removed?
They will be located mainly in the combs with open brood (larvae and eggs) from the hive, since its main function at this stage is to feed the larvae.

How are you doing nurses they will be incorporated into the new hive?
They should be removed one or two frames of brood from the hive to be reinforced. In the space left by them is partially covered introduce the picture with nurse bees will use to strengthen, where they vigorously shake the bees are there. !! EYE before shaking the bees must review the honeycomb fine and verify that there the queen is found. There beekeepers shaking these bees in the entrance of a colony. Thus the foraging bees fly and nurses who are slowly heading into the hive.

In some cases it may be advisable to strengthen colonies foragers, but in these cases we must bear in mind that we will remove such bees to a hive with nectar flow only present. There beekeepers hives exchanging places with nuclei or other weak hives as a way to increase or strengthen the population of a hive. This operation can provide good results at the end of primary and pre-wintering flow as a way to match hives breeding and populations that have come to this time with exaggerated developments.

22 junio 2015

AVISPA ASIATICA: SECCIONA LA CABEZA Y EL ABDOMEN - ASIAN WASP: CUTS THEHEAD AND ABDOMEN.

La avispa asiática alimenta a sus larvas con proteínas que consigue principalmente de los cuerpos de las abejas. Les corta la cabeza y el abdomen y transporta el tórax a su nidos, que proporcionan a sus larvas. 


También obtiene estas proteínas de carne o pescado de animales que encuentran muertos. «Su principal opción son las colmenas, ya que en un mismo viaje obtiene los dos objetivos: alimentarse ellas mismas con el néctar de las abejas a la vez que consigue el alimento para sus larvas».


En otoño, asimismo, la 'Vespa velutina' ataca a la fruta madurada, especialmente a la manzana que se destina a la elaboración de sidra. «Va en busca de la fructosa, ya que necesitan de hidratos de carbono para alimentarse. En esa época escasea el alimento y se dirige a la manzana que hay en las prensas, con el riesgo que ellos conlleva de picaduras y demás. Y de continuar esta expansión, atacará también a la uva madura», afirma Mikel Zubeldia, presidente de los apicultores de Gipuzkoa.

ASIAN WASP: CUTS THEHEAD AND ABDOMEN
Asian wasp larvae feed protein mainly getting the bodies of bees. They cut off his head and abdomen and thorax carries its nests, which provide their larvae. Also you obtain these proteins or fish meat of animals found dead. "The main option is the hives, since in the same trip gets two goals: feeding themselves with the nectar of bees while getting food for their larvae."

In autumn, also the 'Vespa velutina' attacking the ripened fruit, especially apple goes to the cider. "Go in search of fructose as they need carbohydrates to feed. At that time food is scarce and heads to the block that is in the press, with the risk that entails bites them and others. And to continue this expansion, also attack the ripe grapes, "says Mikel Zubeldia, president of beekeepers Gipuzkoa.

20 junio 2015

¿QUE ES LA REGLA DE FARRAR? - THAT IS THE RULE OF FARRAR? (Span and Eng)

La regla de Farrar, conocida por los apicultores hace muchos años, dice que cuanto más aumenta la población de una colmena mayor es la producción individual de cada abeja. Esto equivale a decir que aumenta la productividad y se conoce como un principio de sinergia. Esto se debe a que a medida que aumenta el número de abejas de una colmena, también aumenta la proporción de pecoreadoras, según el siguiente cuadro (Reid, 1980): 









Total de Obreras                                            10.000    20.000   30.000    40.000    50.000   60.000

Pecoreadoras                                                  2.000      5.000    10.000    20.000    30.000   39.000


Porcentaje pecoreadoras                                20 %       25 %      30 %      50 %        60 %      65 % 


Peso de la población                                        1 kg        2 kg       3 kg      4 kg         5 kg       6 kg

Rendimiento miel                                              1 kg        4 kg       9 kg     16 kg       25 kg      36 kg



También podemos hacer un cálculo matemático por el cual conociendo la población de abejas de una colmena, puede estimarse la producción de esta aproximadamente. Decimos que la capacidad de producción es igual al cuadrado del peso de la población.
Si una cámara de cría llena tiene 30.000 abejas y sabemos que 10.000 abejas pesan aproximadamente 1 kg. Una colmena que posee 50.000 abejas estará en capacidad de producir 5 al cuadrado lo que significa 25 kg de miel.

Historia
En 1937, el entomólogo y apicultor estadounidense Clarence L. Farrar, que trabajó en el Ministerio de Agricultura de los Estados Unidos a cargo de la Honey Bee Research Unit (HBRU) entre 1958 a 1961, estando a cargo de él, realizó varias investigaciones sobre el comportamiento de las abejas, al estudiar su dinámica poblacional y curvas de crecimiento, observando el crecimiento y decrecimiento de la población de abejas a lo largo de una temporada.
Los descubrimientos del Dr. Farrar, tienen una implicancia práctica en la producción de miel, y abejas. Si bien su nombre es mencionado en el ABC & XYZ de Root y en la colmena y La abeja melífera de Dadant; no se ha valorado positivamente la magnitud de tales conclusiones. Es por ello que aquí nos atrevemos a elevar a la categoría de Regla Sinergética sus conclusiones: La producción de miel es directamente proporcional a la población de abejas de una colmena.
Una colonia grande tiene una proporción de abejas pecoreadoras mayor que en una colonia chica. Por ello Farrar indica que una colonia de 60.000 abejas produce 1,54 veces más miel que cuatro de 15.000 abejas; que una colonia de 45.000 abejas produce 1,48 veces más miel que tres colonias de 15.000 abejas; que una colonia de 30.000 abejas produce 1,36 veces más miel que dos colonias de 15.000 abejas.
La relación cantidad de abejas adultas respecto a cantidad de cría disminuye con el aumento del tamaño de la población de la colonia. Una colmena grande puede tener una relación 1 abeja adulta por larva, mientras que una colmena pequeña tiene una relación de 2 larva por abeja adulta. Podemos inferir que la colmena en crecimiento se comporta como Estratega R, una vez que alcanzó el equilibrio poblacional se comporta como Estratega K. Este tipo de selección por el cual transita una colmena en la temporada es la explicación de la alta tasa de reproducción o enjambrazón de las Abejas africanizadas que constantemente mantiene sus enjambres/colmenas en estado juvenil.
La proporción entre la cría operculada y la población adulta disminuye ente un 10% y un 14% por cada incremento de 10.000 abejas.

Cría operculada                                                40.000   45.000   50.000   55.000   60.000

Obreras Pecoreadoras                                     20.000   30.000   40.000   50.000   60.000

En condiciones adecuadas de flujos nectíferos, la cantidad de miel potencial que puede producir una colmena (producción de miel) tendría que ser igual al cuadrado de los kg, de abejas que tiene en ese momento. Si en principio éstos conceptos suenan confusos, esperamos que las siguientes aclaraciones contribuyan a su comprensión. Si consideramos que 1 kg de abejas contiene aproximadamente unas 10.000 obreras y que de un cuadro de cría bien operculado nacerán unas 5.000 obreras podemos iniciar la explicación.

Total de Obreras                                  10.000    20.000    30.000   40.000   50.000   60.000

Peso de la población                            1 kg       2 kg        3 kg        4 kg        5kg        6 kg

Rendimiento miel                                   1 kg      4 kg         9 kg     16 kg      25 kg      36 kg

THAT IS THE RULE OF FARRAR?

Farrar rule, known by beekeepers for many years, says that the more the population increases greater hive is the individual production of each bee. That is to say that increases productivity and is known as the principle of synergy. This is because as the number of bees in a hive, it also increases the proportion of foragers, according to the following table (Reid, 1980):


Workers                                      10,000    20,000    30,000    40,000    50,000    60,000

Foragers                                       2,000      5,000    10,000    20,000    30,000     39,000

Foragers Percentage                     20%        25%        30%        50%       60%        65%
Weight population                       1 kg        2 kg         3 kg        4 kg       5 kg         6 kg

Honey yield                                  1 kg        4 kg        9 kg       16 kg      25 kg      36 kg


We can also do a mathematical calculation that knowing the population of bees in a hive, it can be estimated production is approximately. We say that the production capacity is equal to the square of the weight of the population.
If a camera in full breeding has 30,000 10,000 bees and bees we know that weigh about 1 kg. A hive has 50,000 bees will be able to produce 5 squared which means 25 kg of honey.

History
In 1937, American entomologist and beekeeper Clarence L. Farrar, who worked in the Ministry of Agriculture of the United States in charge of the Honey Bee Research Unit (HBRU) between 1958-1961, being in charge of it, he made several research the behavior of bees, to study their population dynamics and growth curves, observing the growth and decline of the bee population over a season.
Dr. Farrar's findings have practical implications for the production of honey and bees. Although his name is mentioned in the ABC & XYZ of Root and the honeybee hive and the Dadant; not has welcomed the magnitude of such conclusions. That is why here we dare to elevate the status of their findings Rule Synergetics: Honey production is directly proportional to the population of bees in a hive.
A large colony has a higher proportion of foraging bees in a colony girl. Therefore Farrar indicates that a colony of 60,000 bees produces 1.54 times more honey than four of 15,000 bees; a colony of 45,000 bees produces 1.48 times more honey than three colonies of 15,000 bees; a colony of 30,000 bees produces 1.36 times more honey than two colonies of 15,000 bees.
The amount of adult bees respect regarding breeding amount decreases with increasing size of the population of the colony. A large hive may have a ratio of 1 adult bee larva, while a small hive has a 2 per adult bee larva. We can infer that the hive growing behaves as Strategist R, once reached the population balance behaves as Strategist K. This type of selection by which transits a hive in the season is the explanation for the high rate of reproduction or swarming Africanized bees constantly maintains its swarms / hives youthful state.
The ratio of sealed brood and the adult population being 10% decrease and 14% for each increment of 10,000 bees.

Capped brood                   40,000     45,000      50,000      55,000      60,000

Workers foragers              20,000     30,000      40,000      50,000      60,000

Nectíferos flows under suitable conditions, the potential amount of honey that can produce a beehive (honey production) should be equal to the square of the kg of bees which has at that moment. If at first these concepts sound confusing, we hope that the following clarifications contribute to their understanding. If we consider that 1 kg of bees contains approximately 10,000 workers and a box well operculado breeding born 5,000 workers can begin the explanation.

Workers                                10,000     20,000     30,000      40,000     50,000       60,000

Weight population                 1 kg         2 kg         3 kg          4 kg        5 kg           6 kg

Honey yield                            1 kg        4 kg          9 kg         6 kg        25 kg        36 kg

16 junio 2015

Estabilidad de vuelo a cambio de energía - Flight stability in exchange for energy.

El viento es un componente universal en la vida de todos los animales voladores. Sin embargo, sabemos muy poco sobre cómo los animales se enfrentan a los momentos de turbulencia y a los flujos impredecibles del viento, pues la mayoría de los estudios sobre los animales voladores han tenido lugar en entornos simplificados, en ausencia del viento o con corrientes de aire sin turbulencias. El nuevo trabajo muestra claramente que el efecto de las turbulencias ambientales en la estabilidad del vuelo es un factor de gran importancia, no reconocido anteriormente, para la ejecución del vuelo.

Stacey Combes, de la Universidad de Harvard, y Robert Dudley, de la Universidad de California en Berkeley, estudiaron 10 especies de abejas silvestres que vuelan a altas velocidades durante decenas de kilómetros cada día buscando alimentos y otros recursos. Los machos de estas especies tienden a dedicar bastantes esfuerzos a la recogida de esencias aromáticas que transportan en las bolsas de sus patas traseras de gran tamaño, que luego utilizan para intentar atraer hembras en el cortejo que precede al apareamiento.

Dado que el macho de una de las especies de abeja estudiadas se siente fuertemente atraído por las esencias, con el fin de obtenerlas atravesará de buena gana espacios aéreos sometidos a condiciones de vuelo difíciles, como las creadas cuando Combes y Dudley emitieron corrientes fuertes de aire en la jungla panameña donde habitan las abejas.

Utilizando grabaciones en video de alta velocidad, los científicos midieron la velocidad máxima de vuelo de las abejas al ser zarandeadas por niveles variables de turbulencia ambiental. En cada caso, las abejas se enfrentaron a las turbulencias extendiendo sus patas traseras al volar.

Aunque Combes y Dudley sólo estudiaron 10 especies de abejas, piensan que ese comportamiento estabilizador está probablemente presente en todos los himenópteros, el orden de insectos que incluye a las abejas, las avispas, las hormigas y otros.

Flight stability in exchange for energy.

Wind is a universal component in the life of all flying animals. However, we know very little about how animals to moments of turbulence and unpredictable wind flows face, since most of the studies on the flying animals have taken place in simplified environments, in the absence of wind or drafts without turbulence. The new work clearly shows that the effect of environmental turbulence on flight stability is an important factor, previously unrecognized, for the execution of the flight.

Stacey Combes, Harvard University, and Robert Dudley of the University of California, Berkeley, studied 10 species of wild bees that fly at high speeds for tens of kilometers each day seeking food and other resources. The males of these species tend to devote enough effort to collect aromatic scents in pouches carrying their large hind legs, which they then use to try to attract females in courtship that precedes mating.

Since the male of the species studied bee feel strongly attracted to scents, in order to obtain readily pass through airspace under difficult flight conditions, such as those created when Combes and Dudley issued strong drafts in the Panamanian jungle inhabited by bees.

Using video recordings in high speed, the scientists measured the maximum speed of flight of bees to be buffeted by varying levels of environmental turbulence. In each case, the bees faced turbulence while flying spreading its hind legs.

While Combes and Dudley only studied 10 species of bees, they think that behavior stabilizer is probably present in all the Hymenoptera order of insects that includes bees, wasps, ants and others.